Insert the SIM card and battery
Always switch the device off and disconnect the charger
before removing the battery.
Important: To prevent damage to the SIM card, always
remove the battery before you insert or remove the card.
1 To prevent the battery from coming loose, place the
device so that the back cover is facing up.
2 Place your finger in the grip, and lift the back cover up.
You do not need to press a button to release the back
cover.
3 To release the SIM card holder, slide the holder to the left
(1), and lift the right end of the holder up (2). Make sure
that the bevelled corner on the card is facing up, and that
the contact area on the card is facing the connectors on
10 Get started
© 2010 Nokia. All rights reserved.
the device (3). Close the holder (4), and slide it to the right
to lock it into place (5).
4 Align the contacts of the battery with the corresponding
connectors on the battery compartment, and insert the
battery in the direction of the arrow.
5 To replace the back cover, direct the locking catch toward
its slot, and press down until the cover locks into place.