Charge the battery
Your battery has been partially charged at the factory. If the
device indicates a low charge, do the following:
Charge the battery using the charger
1 Connect the charger to a wall outlet.
2 Connect the charger to the micro USB connector of the
device.
3 When the device indicates a full charge, disconnect the
charger from the device, then from the wall outlet.
The notification light blinks when the device is charging. The
notification light stays lit when the battery is fully charged.
You do not need to charge the battery for a specific length of
time, and you can use the device while it is charging. If the
battery is completely discharged, it may take several minutes
before the notification light starts blinking or before any calls
can be made.
Charge the battery using the USB cable
You can charge your device using a compatible USB device,
for example a computer, when a wall outlet is not available.
You can also transfer data while charging the device.
1 Connect a compatible USB cable between a compatible
USB device and your device.
Depending on the type of device that is used for charging ,
it may take a while for charging to start.
2 If your device is switched on, USB mode options are
displayed. Select
Mass storage mode
or
PC Suite
mode
to make sure that your device receives enough
power from USB charging.
The notification light blinks when the device is charging. The
notification light stays lit when the battery is fully charged.
If the battery is completely discharged, allow some time for
charging before using your device.
If your device is on and you have many applications running,
the device can consume more power than it receives from
USB charging. Close some of the applications and data
connections, or use the charger that came with the device.
Get started 13
© 2010 Nokia. All rights reserved.